Differences between revisions 13 and 14
Revision 13 as of 2017-05-26 23:53:42
Size: 3605
Editor: bbb
Revision 14 as of 2017-05-26 23:54:21
Size: 3611
Editor: bbb
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:

= Installation Instructions =
Line 7: Line 10:
= Installation Instructions =

Installation Instructions

This information is outdated. Please refer to the instructions on the project homepage.

The following instructions describe how to download and build the latest released version of LITMUSRT. If you intend to use LITMUSRT for development, you should use our source code repositories instead.

The Kernel

The extension to the Linux kernel is released as a patch against the Linux kernel. To install the LITMUSRT kernel, first download the Linux kernel 4.1.3 and untar it in a directory of your choice (hereafter referred to as $DIR). Second, apply the LITMUSRT patch (download the current version) and configure, compile, and install the kernel as usual. The patch is -p1 applicable.

To summarize, the LITMUSRT kernel can be obtained, patched, and compiled with the following commands:

cd $DIR
# get Linux 4.1.3
wget https://www.kernel.org/pub/linux/kernel/v4.x/linux-4.1.3.tar.gz
tar xzf linux-4.1.3.tar.gz
wget http://www.litmus-rt.org/releases/2016.1/litmus-rt-2016.1.patch
mv linux-4.1.3 litmus-rt
# apply the LITMUS RT patch
cd litmus-rt
patch -p1 < ../litmus-rt-2016.1.patch
# create a working kernel configuration
#  - enable in-kernel preemptions
#  - don't use power management options like frequency scaling
#  - disable support for group scheduling
#  - disable "Write protect kernel read-only data structures" (in kernel debug)
make menuconfig
# compile the kernel
make bzImage
make modules # unless you are building static kernel (e.g., for QEMU)
# proceed to install kernel, build initrd, etc.

When configuring the kernel, note that there is a menu (at the very end of the list) with LITMUSRT-specific configuration options. For reference, we provide a sample 64-bit configuration that is known to work under KVM.

The Userspace Library

The user-space library for real-time tasks, liblitmus, depends on the LITMUSRT kernel kernel and provides its own build system. Run make help for instructions. Note that you will have to create a .config file in the library directory to point the build system to the kernel sources. For reference, we provide a sample liblitmus configuration file.

To summarize, the liblitmus can be obtained and compiled with the following commands:

cd $DIR
wget http://www.litmus-rt.org/releases/2016.1/liblitmus-2016.1.tgz
tar xzf liblitmus-2016.1.tgz
cd liblitmus 
wget http://www.litmus-rt.org/releases/2016.1/liblitmus-config
mv liblitmus-config .config

Feather-Trace Tools

The Feather-Trace tools (also known as ft_tools) depend on the liblitmus build system. Before the Feather-Trace tools can be built, you must have successfully compiled liblitmus first. For reference, we provide a sample ft_tools configuration file.

To summarize, the Feather-Trace tools can be obtained and compiled with the following commands:

cd $DIR
wget http://www.litmus-rt.org/releases/2016.1/ft_tools-2016.1.tgz
tar xzf ft_tools-2016.1.tgz
cd ft_tools 
wget http://www.litmus-rt.org/releases/2016.1/ft_tools-config
mv ft_tools-config .config

InstallationInstructions (last edited 2017-05-26 23:54:21 by bbb)